Chris Crafts are built at a plant close to
the Sarasota, Fla. airport. The facilities consist of 2 plants (plant 1
shown) with over 10 production lines running constantly.High Tech tools
such as CAD/CAM-aided routers are
used to ensure
a close production tolerance. However, much hand craftsmanship is still
required to make your Chris Craft. The molds are maintained by hand. First
the high gloss gelcoat is sprayed into the mold.The premium vinyl-ester
skin coat is applied and the hull laid up. Then, the stringer system is
laid into the boat by hand (in this case, Chris Craft's foam-cored Unicore
system) and the entire hull is allowed to cure. The hull is then popped
out of the mold gradually. Hull and Deck are joined with a shoebox style
joint and secured. The boat goes though final Quality Control and selected
hulls are tested in the adjoining test pond. Then boat is then shrink-wrapped
to ensure factory freshness.
